Silicone T-Hose, 25mm (1.00") ID w/25mm (1") ID Branch 38mm The 4-ply reinforcement results in

The 4-ply reinforcement results in a working pressure rating in excess of 35 psi and a 5mm wall thickness (67mm / 2 5/8" OD)

Straight hose is pre-cut to a 1 meter (39") length

Install the aluminum joiner in the lower hose and secure with one small hose clamp

Use with our Aluminum Splicing Nipples (HJ76 and HJ63) and Lined Hose Clamps (Part No

Silicone T-Hose, 25mm (1.00") ID w/25mm (1") ID Branch 38mm The 4-ply reinforcement results inOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Use with our 1" OD